Place of Origin:
Hunan, China
Brand Name:
Picell
Model Number:
PE-C48V200AH
Document:
| Basic Parameters | ||
|---|---|---|
| Battery Type | LiFePO4 | |
| Communication Connector | RS485 | |
| Protection Level | IP20 | |
| Operating Temperature | -15°C to 55°C | |
| Cooling Method | Intelligent air cooling | |
| Built-in Interface | RS485 | |
| Installation Way | Stackable | |
| Noise | <60dB | |
| Statement | Up to 16 battery packs in parallel | |
| Battery Parameters | |||
|---|---|---|---|
| Power | 5.12kWh | 10.24kWh | 15.36kWh |
| Battery Voltage | 40-58.4V | ||
| Battery Rated Voltage | 51.2V | ||
| Battery Module Quantity | 1 | 2 | 3 |
| All-in-One ESS Cabinet Dimensions | 620×438×475mm | 640×438×624mm | 640×438×791mm |
| Max Charge/Discharge Current | 50A/100A | ||
| Inverter Parameters | |||
|---|---|---|---|
| Inverter Output | 5kW | 8kW | 10kW |
| Rated Output Power | 10000VA | 8000W | 10000W |
| Rated Output Voltage | 230Vac (L/N/PE single-phase) | ||
| Load Bearing Motor Capacity | 4HP | 5HP | 6HP |
| Output Waveform | Pure sine wave | ||
| Rated Battery Voltage | 48Vdc | ||
| Voltage Range | 40-60Vdc | ||
| Protection Grade | IP20, indoor use | ||
| Ambient Temperature | -15°C to 55°C (-10°C to 55°C, >45°C derating) | ||
| Photovoltaic Input | ||
|---|---|---|
| Max Input Power | 4,400W | 11000W |
| Max Input Current | 50A | 22/22A |
| Max Open Circuit Voltage | 145Vdc | 500Vdc |
| MPPT Operating Voltage Range | 60-115Vdc | 125-425Vdc |
| MPPT Paths | 1 | 2 |
| Mains/Generator Input | |||
|---|---|---|---|
| Max Mains/Generator Charging Current | 60A | 100A | 120A |
| Rated Frequency | 50Hz/60Hz | ||
| Bypass Overload Current | 40A | 63A | |
Send your inquiry directly to us